 |
|
|
products |
product catalog
price list
|
BONDING MIXTURES |
|
|
|
Ferozit 100
Cement-based dry bonding mix with fillers and polymer modifiers, designed for fixing ceramic tiles, mosaics, natural and artificial stone plates onto rigid surfaces.
|
|
Material consumption - 1.5 kg/m2 for layer thickness of 1 mm.
Water quantity required for mix preparation - 0.2-0.25 l/kg.
Layer thickness - up to 10 mm.
Tile displacement, max - 0.2 mm.
Time allowed for tile alignment - 10 min.
Open-air time - 15 min.
Prepared mix to be used within - 3-4 hours.
Ready for use after - 48 hours
Ambiance temperature - +5 to +30°Ñ
Frost resistance, cycles - no less than 50
Bond resistance (adhesion) - >0.5 MPa
Packaging - 5 and 25 kg paper bags.
|
Suitable for exterior and interior applications.
|
top |
|
|
Ferozit Super
Dry cement-based adhesive mix with fillers and polymer modifiers, designed for fixing low-absorption ceramic tiles, mosaics, natural and artificial stone plates, and greisens onto surfaces subject to wet or frosty conditions (or heat), such as terraces, pedestals, balconies, pools, heated floors, as well as for application over old ceramic tiles.
|
|
Material consumption - 1.5 kg/m2 for layer thickness of 1 mm.
Water quantity required for mix preparation - 0.22-0.25 l/kg.
Layer thickness - up to 10 mm.
Tile displacement, max - 0.5 mm.
Time allowed for tile alignment - 10 min.
Open-air time - 15 min.
Prepared mix to be used within - 3-4 hours.
Ready for use after - 48 hours
Ambiance temperature - +5 to +30°Ñ
Frost resistance, cycles - no less than 75
Bond resistance (adhesion) - >1.0 ÌPà.
Packaging - 25 kg paper bags.
|
Suitable for exterior and interior applications.
|
top |
|
|
Ferozit 105
Dry bonding mix based on white cement with fillers and polymer modifiers, designed for fixing marble plates and light natural or artificial stone plates onto concrete, cement, and cement-and-lime plaster surfaces. It stands out for its advanced adhesive properties, flexibility, heat and frost resistance.
|
|
Material consumption - 1.5 kg/m2 for layer thickness of 1 mm.
Water quantity required for mix preparation - 0.22-0.25 l/kg.
Layer thickness - up to 10 mm.
Tile displacement, max - 0.5 mm.
Time allowed for tile alignment - 10 min.
Open-air time - 15 min.
Prepared mix to be used within - 2-2.5 hours
Ready for use after - 48 hours.
Ambiance temperature - +5 to +30°Ñ
Frost resistance, cycles - no less than 75
Bond resistance (adhesion) - >1.0 ÌPà.
Packaging - 25 kg paper bags.
|
Suitable for exterior and interior applications.
|
top |
|
|
Ferozit 107
Dry quick-setting bonding mix based on cement with fillers and polymer modifiers, designed for fixing ceramic or artificial stone tiles onto concrete, cement or cement-and-lime surfaces. It is especially suitable for quick tiling jobs in places with intensive foot traffic (passageways, underpasses, etc.). It is possible to place technological equipment onto completed areas and fill tile joints after 3 hours upon application.
|
|
Material consumption - 1.5 kg/m2 for layer thickness of 1 mm.
Water quantity required for mix preparation - 0.22-0.25 l/kg
Layer thickness - up to 10 mm.
Tile displacement, max - 0.5 min.
Time allowed for tile alignment - 10 min.
Open-air time - 10 min.
Prepared mix to be used within - 30-45 min.
Ready for use after - 3 hours
Ambiance temperature - +5 to +30°Ñ
Frost resistance, cycles - no less than 75
Bond resistance (adhesion) - >1.0 ÌPà.
Packaging - 25 kg paper bags.
|
Suitable for exterior and interior applications.
|
top |
|
|
Ferozit 110
Dry cement-based bonding mix with fillers and polymer modifiers, designed for fixing foam-polystyrene and rockwool boards onto brickwork, concrete or plastered surfaces, and for use in water-repellent reinforcing layers of heat insulation systems.
|
|
Material consumption - 4.5 kg/m2 for layer thickness of 1 mm.
Water quantity required for mix preparation - 0.22-0.25 kg/l
Layer thickness - 3-10 mm.
Prepared mix to be used within - 3-4 hours
Ready for use after - 3 days
Ambiance temperature - +5 to +30°Ñ
Frost resistance, cycles - no less than 75
Bond resistance (adhesion) - >1.0 ÌPà.
Packaging - 25 kg paper bags.
|
Suitable for exterior and interior applications.
|
top |
|
|
Ferozit 120
Dry gypsum-based bonding mix with fillers and polymer modifiers, designed for fixing paper-faced gypsum boards onto brickwork, concrete, plastered and other surfaces. Suitable for surface leveling jobs.
|
|
Material consumption - 4.0-5 kg/m2
Water quantity required for mix preparation - 0.56-0.61 l/kg
Layer thickness - up to 30 mm.
Open-air time - 20 min.
Prepared mix to be used within - 1.0-1.5 hours
Ready for use after - 6 hours
Ambiance temperature - +5 to +30°Ñ
Bond resistance (adhesion) - >0,5 ÌPà.
Packaging - 25 kg paper bags.
|
Suitable for interior applications.
|
top |
|
|
Ferozit 130
Dry gypsum-based bonding mix for laying gypsum blocks. Also suitable for starting surface plastering jobs.
|
|
Material consumption - 1,2 kg/m2 for layer thickness of 1 mm.
Water quantity required for mix preparation - 0.59-0.61 l/kg
Layer thickness - up to 20 mm.
Open-air time - 20 min.
Prepared mix to be used within - 0.8-1.0 hours
Ready for use after - 6 hours
Ambiance temperature- +5 to +30°Ñ
Bond resistance (adhesion) - >0,5 ÌPà.
Packaging - 25 kg paper bags.
|
Suitable for interior applications.
|
top |
|
|
Ferozit 140
Dry cement-based bonding mix with polymer modifiers, designed for laying foam- and gas-concrete blocks. Compared to traditional materials, Ferozit 140 significantly reduces heat loss.
|
|
Material consumption - 1.5 kg/m2 for layer thickness of 1 mm.
Water quantity required for mix preparation - 0.22-0.25 l/kg
Layer thickness - up to 10 ìì.
Open-air time - 20 min.
Prepared mix to be used within - 3.5-4 hours
Ready for use after - 24 hours
Ambiance temperature - +5 to +30°Ñ
Frost resistance, cycles - no less than 50
Bond resistance (adhesion) - >0,5 ÌPà.
Packaging - 25 kg paper bags.
|
Suitable for exterior and interior applications.
|
top |
|
|
|
|
|
|
|
